反复在阅读和写作之间交替
Alternating between reading and writing repeatedly
本文关键字:之间 更新时间:2023-10-16
我的目标是逐行读取文件,检查该行是否包含某些数字,如果是,则重写该行。然后继续读取文件。我已经成功地做到了一行,但我无法弄清楚如何继续阅读文件的其余部分。以下是我替换一行的方法(每行都是已知的固定大小):
while(getline(fs, line)){
if(condition){
pos = fs.tellg(); //gets current read position (end of the line I want to change)
pos -= line.length()+1; //position of the beginning of the line
fs.clear(); //switch to write mode
fs.seekp(pos); //seek to beginning of line
fs << new_data; //overwrite old data with new data (also fixed size)
fs.close(); //Done.
continue;
}
}
如何切换回读取并继续获取行循环?
我遇到了同样的问题,TB级文件,我想修改文件开头的一些标头信息。显然,当最初为任何新内容创建文件时,必须留出足够的空间,因为没有办法增加文件大小(除了附加到它),并且新行必须具有与原始行完全相同的行长度。
这是我的代码的简化:
#include <iostream>
#include <fstream>
using namespace std;
bool CreateDummy()
{
ofstream out;
out.open("Dummy.txt");
// skip: test if open
out<<"Some Header"<<endl;
out<<"REPLACE1 12345678901234567890"<<endl;
out<<"REPLACE2 12345678901234567890"<<endl;
out<<"Now ~1 TB of data follows..."<<endl;
out.close();
return true;
}
int main()
{
CreateDummy(); // skip: test if successful
fstream inout;
inout.open("Dummy.txt", ios::in | ios::out);
// skip test if open
bool FoundFirst = false;
string FirstText = "REPLACE1";
string FirstReplacement = "Replaced first!!!";
bool FoundSecond = false;
string SecondText = "REPLACE2";
string SecondReplacement = "Replaced second!!!";
string Line;
size_t LastPos = inout.tellg();
while (getline(inout, Line)) {
if (FoundFirst == false && Line.compare(0, FirstText.size(), FirstText) == 0) {
// skip: check if Line.size() >= FirstReplacement.size()
while (FirstReplacement.size() < Line.size()) FirstReplacement += " ";
FirstReplacement += 'n';
inout.seekp(LastPos);
inout.write(FirstReplacement.c_str(), FirstReplacement.size());
FoundFirst = true;
} else if (FoundSecond == false && Line.compare(0, SecondText.size(), SecondText) == 0) {
// skip: check if Line.size() >= SecondReplacement.size()
while (SecondReplacement.size() < Line.size()) SecondReplacement += " ";
SecondReplacement += 'n';
inout.seekp(LastPos);
inout.write(SecondReplacement.c_str(), SecondReplacement.size());
FoundSecond = true;
}
if (FoundFirst == true && FoundSecond == true) break;
LastPos = inout.tellg();
}
inout.close();
return 0;
}
输入为
Some Header
REPLACE1 12345678901234567890
REPLACE2 12345678901234567890
Now ~1 TB of data follows...
输出为:
Some Header
Replaced first!!!
Replaced second!!!
Now ~1 TB of data follows...
相关文章:
- C++中std::resize(n)和std::shrink_to_fit之间的区别
- int(c) 和 c-'0' 之间的区别。C++
- 在cuda线程之间共享大量常量数据
- 在c代码之间共享数据的最佳方式
- Mix_Init和Mix_OpenAudio SDL之间的区别是什么
- C++ 使用 assign 函数的字符串与直接使用 '=' 更改值的字符串之间的区别
- VSOMEIP-2个设备之间的通信(TCP/UDP)不工作
- std::atomic和std::condition_variable wait,notify_*方法之间的区别
- 大小相等但成员数量不同的结构之间的性能差异
- 类与私有变量的其他类之间的线程安全性
- 如何在cpp文件之间切换窗口?在Qt中
- 线程之间的布尔停止信号
- 我是C++编程的新手,这些代码之间有什么区别,我应该使用哪一个
- 在 const 函数中通过引用和指针返回之间的区别
- 我想知道长双倍和双倍之间的区别
- 如何防止clang格式在流运算符调用之间添加换行符<<
- 在两台机器之间进行时间戳的最佳c++chrono函数是什么
- 使用.find函数在c++中查找字符和另一个字符之间的大小
- 构造函数和转换运算符之间的重载解析
- C++LinkedList问题.数据类型之间存在冲突?没有匹配的构造函数