在无法访问的目的地上 ICMP 回显请求/回复的正确过程是什么
What is the proper process for ICMP echo request/reply on unreachable destinations?
目标:
我需要能够 ping 网络交换机以确定它是否可用。这是为了告诉用户网络布线已拔出、网络交换机不可用或网络通信路径中存在其他问题。我意识到这不是一个全面的诊断工具,但有总比没有好。
设计:
我计划使用带有原始套接字的ICMP以IPv4点表示法向特定地址发送五(5(条ping消息。我将在套接字上设置ICMP过滤器,并且不会创建自己的IP标头。ICMP的传输将通过发送方法进行,接收将通过recvfrom方法进行。这将发生在单个线程上(尽管另一个线程可用于将传输和接收分开(。通过将收到的消息的 ID 与传输的消息的 ID 匹配,将进一步过滤消息的接收。存储的 ID 将是应用程序的正在运行的进程 ID。如果收到ICMP_ECHOREPLY消息并且消息的 ID 和存储的 ID 匹配,则计数器将递增,直到达到五 (4( 个(计数器从零开始(。我将尝试发送ping,等待其回复,然后重复此过程五(5(次。
问题:
实现我的设计后,每当我与活跃的网络参与者 ping 一个特定的有效网络地址(例如 192.168.11.15(时,我都会收到五 (5( 次 ping 中每 (5( 次 ping 的ICMP_ECHOREPLY条消息。但是,每当我使用非活动网络参与者(意味着没有设备连接到特定地址(ping有效的网络地址(例如192.168.30.30(时,我都会收到一(1(ICMP_DEST_UNREACH和四(4(ICMP_ECHOREPLY消息。回复消息中的 ID 与软件中存储的 ID 匹配。每当我从命令行执行"ping 192.168.30.30"时,我都会得到"来自 192.168.40.50 icmp_seq=xx 目标主机无法访问"。我不应该接收ICMP_DEST_UNREACH消息而不是ICMP_ECHOREPLY消息吗?
守则:
平:
#include <netinet/in.h>
#include <linux/ip.h>
#include <linux/ipmc.h>
#include <arpa/inet.h>
#include <cstdio>
#include <cstdlib>
#include <stdint.h>
#include <time.h>
#include <errno.h>
#include <string>
#include <cstring>
#include <netdb.h>
class Ping
{
public:
Ping(std::string host) : _host(host) {}
~Ping() {}
void start()
{
int sock = socket(AF_INET, SOCK_RAW, IPPROTO_ICMP);
if(sock < 0)
{
printf("Failed to create socket!n");
close(sock);
exit(1);
}
setuid(getuid());
sockaddr_in pingaddr;
memset(&pingaddr, 0, sizeof(sockaddr_in));
pingaddr.sin_family = AF_INET;
hostent *h = gethostbyname(_host.c_str());
if(not h)
{
printf("Failed to get host by name!n");
close(sock);
exit(1);
}
memcpy(&pingaddr.sin_addr, h->h_addr, sizeof(pingaddr.sin_addr));
// Set the ID of the sender (will go into the ID of the echo msg)
int pid = getpid();
// Only want to receive the following messages
icmp_filter filter;
filter.data = ~((1<<ICMP_SOURCE_QUENCH) |
(1<<ICMP_DEST_UNREACH) |
(1<<ICMP_TIME_EXCEEDED) |
(1<<ICMP_REDIRECT) |
(1<<ICMP_ECHOREPLY));
if(setsockopt(sock, SOL_RAW, ICMP_FILTER, (char *)&filter, sizeof(filter)) < 0)
{
perror("setsockopt(ICMP_FILTER)");
exit(3);
}
// Number of valid echo receptions
int nrec = 0;
// Send the packet
for(int i = 0; i < 5; ++i)
{
char packet[sizeof(icmphdr)];
memset(packet, 0, sizeof(packet));
icmphdr *pkt = (icmphdr *)packet;
pkt->type = ICMP_ECHO;
pkt->code = 0;
pkt->checksum = 0;
pkt->un.echo.id = htons(pid & 0xFFFF);
pkt->un.echo.sequence = i;
pkt->checksum = checksum((uint16_t *)pkt, sizeof(packet));
int bytes = sendto(sock, packet, sizeof(packet), 0, (sockaddr *)&pingaddr, sizeof(sockaddr_in));
if(bytes < 0)
{
printf("Failed to send to receivern");
close(sock);
exit(1);
}
else if(bytes != sizeof(packet))
{
printf("Failed to write the whole packet --- bytes: %d, sizeof(packet): %dn", bytes, sizeof(packet));
close(sock);
exit(1);
}
while(1)
{
char inbuf[192];
memset(inbuf, 0, sizeof(inbuf));
int addrlen = sizeof(sockaddr_in);
bytes = recvfrom(sock, inbuf, sizeof(inbuf), 0, (sockaddr *)&pingaddr, (socklen_t *)&addrlen);
if(bytes < 0)
{
printf("Error on recvfromn");
exit(1);
}
else
{
if(bytes < sizeof(iphdr) + sizeof(icmphdr))
{
printf("Incorrect read bytes!n");
continue;
}
iphdr *iph = (iphdr *)inbuf;
int hlen = (iph->ihl << 2);
bytes -= hlen;
pkt = (icmphdr *)(inbuf + hlen);
int id = ntohs(pkt->un.echo.id);
if(pkt->type == ICMP_ECHOREPLY)
{
printf(" ICMP_ECHOREPLYn");
if(id == pid)
{
nrec++;
if(i < 5) break;
}
}
else if(pkt->type == ICMP_DEST_UNREACH)
{
printf(" ICMP_DEST_UNREACHn");
// Extract the original data out of the received message
int offset = sizeof(iphdr) + sizeof(icmphdr) + sizeof(iphdr);
if(((bytes + hlen) - offset) == sizeof(icmphdr))
{
icmphdr *p = reinterpret_cast<icmphdr *>(inbuf + offset);
id = ntohs(p->un.echo.id);
if(origid == pid)
{
printf(" IDs match!n");
break;
}
}
}
}
}
}
printf("nrec: %dn", nrec);
}
private:
int32_t checksum(uint16_t *buf, int32_t len)
{
int32_t nleft = len;
int32_t sum = 0;
uint16_t *w = buf;
uint16_t answer = 0;
while(nleft > 1)
{
sum += *w++;
nleft -= 2;
}
if(nleft == 1)
{
*(uint16_t *)(&answer) = *(uint8_t *)w;
sum += answer;
}
sum = (sum >> 16) + (sum & 0xFFFF);
sum += (sum >> 16);
answer = ~sum;
return answer;
}
std::string _host;
};
主.cpp:
#include "Ping.h"
int main()
{
// Ping ping("192.168.11.15");
Ping ping("192.168.30.30");
ping.start();
while(1) sleep(10);
}
为了编译,只需在 Linux 框的命令行中键入 'g++ main.cpp -o ping',它应该编译(也就是说,如果安装了所有源代码(。
结论:
谁能告诉我为什么我从不在该特定网络地址上的设备收到一 (1( ICMP_DEST_UNREACH和四 (4( ICMP_ECHOREPLY消息?
注意:您可以从主文件更改网络 IP 地址.cpp。只需将 IP 更改为网络上实际存在的设备或网络上不存在的设备即可。
我对关于编码风格的批评也不感兴趣。我知道它不漂亮,"C"风格的转换与C++转换混合在一起,内存管理很差等,但这只是原型代码。它并不意味着漂亮。
我发现了错误。看看这两行。
int bytes = sendto(sock, packet, sizeof(packet), 0, (sockaddr *)&pingaddr, sizeof(sockaddr_in));
bytes = recvfrom(sock, inbuf, sizeof(inbuf), 0, (sockaddr *)&pingaddr, (socklen_t *)&addrlen);
这两个函数都使用指针作为参数pingaddr
但应避免这样做,因为在sendto()
函数中用于指向 ICMP 数据包的目标 IP,但在recvfrom()
中用于获取正在回复的主机的 IP。
假设pingaddr
设置了无法访问的 IP。在您第一次ICMP_REQUEST
后,第一个网关将回复您ICMP_DEST_UNREACH
并...错误来了...当调用 recvfrom 时,pingaddr 结构将被网关的 IP 覆盖。
所以。。。从第二个ping开始,您将指向显然存在的网关IP,并将以ICMP_ECHOREPLY
回复。
溶液:
避免将相同的sockaddr_in
结构指针传递给 sendto()
和 recvfrom()
。
- 有关插入适配器的错误。[错误]请求从 'back_insert_iterator<vector<>>' 类型转换为非标量类型
- 如何在boost beast http请求中设置http头
- 发送一个带有libcurl C++问题的帖子请求:s
- 在多个核心中处理一个HTTP请求
- 错误:请求非类类型为"MULTIMEDIA_FILME [500]"的成员|
- 使用 Winsock2.h C++向不和谐 API 发送 HTTP 请求时出现问题
- 每个服务器请求的内存预算
- std::getline没有在while循环中重新请求用户输入
- 请求最简单的 OpenMP 目标 GPU 示例
- QT:管理来自 QNetworkReply 的回复
- 请求有关C++中嵌入 for 循环的帮助
- 错误:请求从"常量字符 [5]"转换为非标量类型"字符串"
- 使用 winsock 接收 http 请求
- 使用 select() 的请求/回复服务器。无法写回客户端
- ZeroMQ基本请求回复实现
- 回复帖子请求
- 在无法访问的目的地上 ICMP 回显请求/回复的正确过程是什么
- 黑莓10:如何将传入的http回复与其以前的http请求对应
- 在最后一个回复完成后才发送POST请求
- IBM MQ - WMQ C++ 获取请求的消息 ID 并将其设置为回复的相关 ID